WFHSS – 16ème Congrès Mondial de la Stérilisation & Conférence annuelle de l’AFS, Lille, 2015

  1. Le programme
  2. Les posters
  3. Les conférences
  4. Cérémonie de clôture

Les posters

ID-22 – Monitoring of cleaning and antimicrobial products used in health-care settings in Minas Gerais – Brazil
Eni Rosa MESIANO, BRAZIL

ID-54 – Storage and management of sterile reusable medical devices audit
Marine AUSSEDAT, FRANCE

ID-55 – Cleaning and pre-disinfection audit in health care units
Marine AUSSEDAT, FRANCE

ID-57 – Medical cost comparison of two chemical disinfection products in sterilization
Laura MARTINEZ, FRANCE

ID-70 – The role of Operating Room Nurses (ORN) in the collaboration between orthopedic surgery and central unit of sterilization
Eloïse MONTIEL, FRANCE

ID-72 – Regulation on enzymatic detergents – RDC nº 55 de 14 de novembro de 2012
Eni Rosa MESIANO, BRAZIL

ID-73 – Evaluation of pre-disinfection information and medical device traceability at the reception in CSSD
Thibaud SEVIN, FRANCE

ID-75 – Let´s play to improve sterilization knowledge !
Ingrid JULLIAN-DESAYES, FRANCE

ID-76 – A study on physical characters of hemostatic forceps
Kazumi TANAKA, JAPAN

ID-77 – Internal and external cleaning of dental handpieces: a method to test its efficiency
Damien OFFNER, FRANCE

ID-78 – Reevaluation of residual ethylene oxide in sterilized plastic materials for medical use
Naomi BETSUMIYA, JAPAN

ID-83 – Sterilization: professional practices evaluation as part of subcontracting
Claire LE CORVAISIER, FRANCE

ID-85 – Washer-disinfector temperature curve stability assessment post performance qualification
Kelly SILVA, BRAZIL

ID-86 – Optimization of the instrument stock in Le Mans Hospital (CHM): an essential link to secure the management of patients who are operated on
Anne-Lise LECOQ, FRANCE

ID-88 – Prevention of prion transmission through reusable invasive medical devices: implementation of national recommendations in healthcare facilities of a French region
Caroline BERVAS, FRANCE

ID-89 – Making the value flow: application of value stream mapping in a Brazilian public healthcare organization
Daniela SCHNEIDER, BRAZIL

ID-90 – A statistical modeling approach for work design
Daniela SCHNEIDER, BRAZIL

ID-91 – Endoscopes disinfection: an analysis of current practices
Sophie VIANDE, FRANCE

ID-93 – Packaging system challenge in France : test of a new nonwoven pack
Helene MULLOT, FRANCE

ID-94 – Impact of Low temperature Sterilization on ophthalmologic lenses – the use of STERRAD®NXTM and 100NXTM technology
Marie-Claire DESPIAU, FRANCE

ID-96 – Loaner instrumentation management program by using lean system
Kattika SUKAVAL, THAILAND

ID-97 – The rearrangement form of ”The document paper detailed recording of medical devices items that have been sent to the Siriraj CSSD“
Kattika SUKAVAL, THAILAND

ID-98 – Risk analysis of a central sterile material supply department
Audrey GLANARD, FRANCE

ID-99 – Veterinary Drugs and Biologics Division
Yangho JANG, REPUBLIC OF KOREA

ID-100 – Study of non-conformity occurrences in sterilization service: from results to corrective action plan
Elodie MUSY, FRANCE

ID-101 – Evaluation and improvement of laparoscopic trocars sterilization
Helene MILLOT-LUSTIG, FRANCE

ID-102 – Improvement of the management and the traceability of optics in sterilization
Emmanuelle GRANIER, FRANCE

ID-103 – Evaluation of the assembly process quality in a french sterilization department
Julie SCHOLLER, FRANCE

ID-104 – Peroperative loss of the sterile state of a unique surgical instrument: a practical tool for decision-making
Laëtitia RASCAL, FRANCE

ID-105 – Surgical boxes recomposition by sterilization agents: methodology and challenges
Laëtitia RASCAL, FRANCE

ID-106 – Agent of Department of Sterilization: fully fledged job
Dominique THIVEAUD, FRANCE

ID-107 – Security action for sterilization consumables management
Mathieu LEFEBVRE, FRANCE

ID-108 – Estimated overtime for treatment of ancillary loan and their implantable medical devices
Omar AIMER, FRANCE

ID-111 – Prion Products and LDI : Is it necessary to neutralize ?
Sylvie RASPAUD, FRANCE

ID-112 – Evaluation of the pre-disinfection cleaning method of medical devices after use in surgical units and medical wards in a general hospital
Anne-Sophie PROMIS, FRANCE

ID-113 – Monitoring of surgical packs’ contents during sterilization process: a quality performance indicator
Julie RENAUD, FRANCE

ID-116 – The efficiency of a jet pressure cleaning tool set to remove contaminated content in medical devices lumens
Heloisa Helena HOEFEL, BRAZIL

ID-118 – Score system for CSSD
Heloisa Helena HOEFEL, BRAZIL

ID-120 – Challenges in implementing validation testing of the sealing process
Marina Sayuri YOSHIMOTO, BRAZIL

ID-121 – Analysis and sterility maintenance check of surgical instrumental exposed in operating theater of the Hospital do Coração (HCor) – São Paulo
Mara RIBEIRO, BRAZIL

ID-122 – Medico-economic benefit from replacing reusable bronchoscopes with single-use versions – A microcosting evaluation
Adeline WOJCIK, FRANCE

ID-123 – Labels choice for identification and traceability of operating room basket : comparison after accelerated degradation process
Anne-Valerie LEBELLE-DEHAUT, FRANCE

ID-124 – Sterilization and risks : mapping of a complex multi-step process
Elodie PUZENAT, FRANCE

ID-125 – Pre-disinfection : a step to master outside the walls of the sterilization unit
Elodie PUZENAT, FRANCE

ID-126 – Comparative cost study of 3 techniques of poses for wrist implants: could we overcome the sterilization ?
Elodie PUZENAT, France

ID-127 – The nurse’s responsibility of the CMS (Central of Material and Sterilization) in the validation of autoclaves, challenge of the loads and in choice of the supplies
Mariangela BELMONTE RIBEIRO, BRAZIL

ID-129 – Container sealing evaluation after repair by the water leak test
Sandrine NGUYEN, FRANCE

ID-130 – Monitoring of physical and chemical sterilization process as good practices for patient safety in a public hospitalof Brazil: experience report
Edna BECK, BRAZIL

ID-131 – Steam sterilization record evaluation: report of experience in a public hospital in Brazil
Evelyn TEORO, BRAZIL

ID-132 – Costs of the supplying process of materials of respiratory assistance in a large, tertiary, public and general hospital
Cassio STIPANICH, BRAZIL

ID-133 – Reduction of infection in clean surgeries: key elements of the multidisciplinary team for achieving process excellence
Giovana Abrahão de Araujo MORIYA, BRAZIL

ID-134 – Conscious use of human, natural and material – review of the composition of surgical instrument kits
Giovana Abrahão de Araujo MORIYA, BRAZIL

ID-135 – Surgical treatment of chronic wound infections with vacuum therapy and plastic corset
Katerina RISTOVSKA JANEV, MACEDONIA

ID-136 – Positive Deviance methodology applied to the surgical checklist
Giovana Abrahão de Araujo MORIYA, BRAZIL

ID-137 – Pharmaco-economic analysis of minimization of the costs for a set of anesthesia epidural
Justine THERIN, FRANCE

ID-138 – Nurses’ knowledge, attitude and practice on central sterile supply in Greek hospitals
Ioannis g. KOUTELEKOS, GREECE

ID-139 – Water crisis also affects hospitals: a look at the instrumental cleaning process at Sterilized Material Center
Rosangela claudia NOVEMBRE, BRAZIL

ID-142 – Comparison of two Data Matrix code readers used for the surgical instrument traceability
Alexandre BEAUFILS, FRANCE

ID-143 – Relevance of operating trays pre-assembly in operating theaters: a step to improve instruments traceability
Anne-cecile DUPLOYEZ, FRANCE

ID-144 – What can we doing to avoid residual water in container ?
Sophie CHRISTOPHE-BAUER, FRANCE

ID-145 – Fixing/wedging systems: suitable solution in case of outsourcing
Julie DI PAOLO, FRANCE

ID-146 – Comparative medical economical study about cataract surgery sets: single use versus reusable
Marion LANDOUZY, FRANCE

ID-147 – Organizational impact of the E-assessment of prion disease risks
Marion LECA, FRANCE

ID-148 – Risks management on reusable medical devices process in sterilization
Adeline CHAMPIER, FRANCE

ID-150 – Evaluation of corrosion effects on surgical instruments
Gerhard KIRMSE, GERMANY

ID-152 – A study of dental handpiece manufacturers’ reprocessing instructions mapped against EN ISO 17664:2004
George MCDONAGH, UNITED KINGDOM

ID-153 – Prospective risk analysis about osteosynthesis implants supply process
Elsa JOUHANNEAU, FRANCE

ID-155 – Technical expertise evaluation of four companies specialized in maintenance of surgical instruments
Stéphane CORVAISIER, FRANCE

ID-156 – Cost comparison of two reprocessing procedures of flexible ureteroscopes
Alexandre BOISSEL, FRANCE

ID-157 – Caracteristics of people working in central sterilization units in Turkey
Serfe DAYLAN, TURKEY

ID-158 – The influence of handpiece oil on different steam sterilization processes
Sandra WINTER, UNITED KINGDOM

ID-160 – Intrabeam – technological innovation treatment for breast cancer: spherical applicator traceability control
Elaine LASAPONARI, BRAZIL

ID-161 – Comparison of different methods to clean dental handpieces
Charles KHOURI, FRANCE

ID-162 – Quality improvement of the environment in the CSSD: monitoring the cleanliness of hands and surfaces with the ATP detection method
Isabel VEIGA-MALTA, PORTUGAL

ID-164 – Centralization of surgical instruments in a central sterilization unit: any impact(s) on the quality?
Mélanie VAN HOLLEBEKE, FRANCE

ID-165 – Comparison between laminated and non-laminated printing tape to identify surgical trays
Audrey GLANARD, FRANCE

ID-166 – Evaluating surgical instrument repair effect and maintain strategy
Tsuey Ru LIN, TAIWAN

ID-167 – Goubanne® system routine interest as proof of steam penetration
Clemence RIEU, FRANCE

ID-168 – Feedback: activity of subcontracting Foch hospital (92) – low temperature sterilization
Amelie LECLERE, FRANCE

ID-169 – Toronto Western Hospital Spinal 5S Rapid Improvement Event (RIE)
Aileen GUNDA, CANADA

ID-170 – Doctor, how should we proceed to sterilize the instrumentation for two additional orthopaedic surgical procedures?
Sylvain DINI, FRANCE

ID-171 – Processing time in sterilization: for daily quality
Aude CAPELLE, FRANCE

ID-172 – Analysis of non-conforming boxes: for a better coordination beetween the operating room and sterilization?
Aude CAPELLE, FRANCE

ID-173 – Comparison of the state of practice by FMEA risk analysis in three health structures
Pauline GRIMONT, FRANCE

ID-174 – The condition of medical waste units in province of Ordu, Turkey
Kader TIRYAKI, TURKEY

ID-175 – Use of Jetwash technique in hollow instruments washing
C. BARONNET, FRANCE

ID-176 – A survey on ”selecting and supplying disenfectant process“
Dilek ZENCIROGLU, TURKEY

ID-177 – An evidence based study to determine shelf life
Dilek ZENCIROGLU, TURKEY

ID-178 – Towards surface engineering in hygienic applications
Cécilia ANDERBERG, SWEDEN